V-Studio 100 1.19 Firmware Update

Last updated on 3/31/2016

This firmware update includes general compatibility fixes for the V-Studio 100 hardware.

All V-Studio 100 owners currently running firmware version 1.17 or 1.18 will need to apply this update, if your current firmware is 1.19 or higher than there is no need for this update.

You can check the currently installed firmware version when you power up the VS-100, the version of the current system software is displayed in the lower right corner corner of the screen.

Note: Users running firmware version 1.17 can update directly to 1.19. It is not necessary to first apply the 1.18 update however it will not harm the VS-100 if you do so.

Enhancements in Firmware version 1.19

  1. Resolved an issue where the Track Select buttons would not properly switch between tracks when using Mackie Control in other hosts.

Also including version 1.18 changes

 

  1. Fixed an issue where the mixer would not display properly
  2. In some cases it was taking 5-6 seconds for digital inputs to lock
  3. When unit was powered on with input connected to 3/4 it was being recognized as monaural

For installation instructions visit the V-Studio 100 Firmware Update Instructions page.

 

 

DownloadDownload the V-Studio 100 1.19 Firmware Update (Approx. 1 MB)

 

Cakewalk // Support // Knowledge Base // V-Studio 100 1.19 Firmware Update
Copyright © 2024 Cakewalk, Inc. All rights reserved
Sitemap | Privacy Policy | Legal